Southeastern Glass Systems
is committed to delivering
the best automatic door
systems available on the
market, and is dedicated
to making the purchase and
maintenance of our products
as simple, streamlined and
effective as possible.
Our products may be the
best products in the world
but the process would not
be complete without a high
quality installation and
efficient aftermarket service.
We use the highest caliber
factory trained technicians
to ensure complete satisfaction.
9200
Series
Automatic Sliding Door System
is a fixed sidelight
door package. Only the sliding
panels breakout for emergency
egress. The Aluminum door
package is available as a
single slide and bi-part slide
with or without transom.
The sensor combines both
motion and presence detection
utilizing infrared technology
for both activation and
threshold protection.
9300
Series
Automatic Sliding Door System
is a full breakout door package.
All panels breakout for emergency
egress. The aluminum door
package is available
as a single slide and bi-part
slide with or without transom.
Function Control
Panel;
Changing the operating characteristics
and door parameters is a
simple task with the 9000
series controller.
9400
Series
Automatic Sliding Door System
is a full breakout telescopic
slide door system. The all
aluminum door package provides
maximum opening width and
is available as a single slide
or bi-part package with breakout.
Direct
Drive has no gears and no
oil, which results in lower
wear, longer life and lower
operating cost.
9500
Series
Is an all-glass sliding door
entrance system. It creates
an appealing design oriented
environment that provides
open and clear lines of sight.
The 9500 utilizes the direct
drive system and tempered
glass panels. Finishes available
are clear or dark bronze as
well as stainless steel or
brass clad finish.
Integrated
into a single unit the K-band
microwave and focused infrared
sensor provides unequalled
technology.
The
TDA non-handed, power open,
spring close swing door operator
represents the ultimate in
swing door technology, designed
specifically to operate on
a broad variety of swing door
applications.
The
TDA series operator is the
most advanced swing door
operator on the market today.
It is available in a single,
pair, dual independent or
double egress application.
TTX Low energy swing door
operator is a low cost, easily
adjustable automatic door
system. It delivers exceptionally
long lasting performance,
and meets ANSI standard A156.19
that specifies opening and
closing speeds as well as
force requirements.
This TTX non-handed power
open, spring close operator
is applicable to interior
and exterior doors up to
48" and weighing up
to 220 pounds.
The ultimate answer for door
automation. The operator is
in the floor and hidden from view.
This is the perfect answer
for maintaining the architectural
design for both new building
and older buildings.
The
TN operator is approved for use in buildings
recognized by the Historic Preservation
Society. Additionally, the
TN operator meets ADA requirements for any entrance
door. An excellent choice for doors
weighing up to 1100 pounds.
Uninet system is a custom
software product for the purpose
of networking automatic and
non-automatic door operator.
The networked system can monitor
door operation, signal alarm
conditions, and identify door
problems. It can be operated
by a personal
computer or be integrated
into centralized building
management system. Additionally,
the software can be applied
in a stand-alone building,
a campus environment, or distributed
group of buildings in different
locations.
Our sensor systems represent
the most advanced and
reliable systems available
today. Sensor systems
for slide doors, swing
doors, folding doors,
revolving doors and
industrial doors ensure
precise activation and
reliable threshold protection.
The
Omega, using focused
active infrared technology
provides safety for
swinging, folding, or
revolving door systems.
Upon sensing a person
in the path of the door,
the sensor will stop
or slow the door.
The
Alta K-band microwave
motion detector is the
sensor of choice for
all automatic doors.
Employing sophisticated
motion tracking technology
this product meets ANSI
Standards.
The
Beta G utilizes diffused
active infrared technology
to provide a safe passage
for pedestrians, Recognizing
door-open and door-closed
positions the sensor
floods the threshold
with presence protection
when the door is open.
For added convenience and
accessibility the door operator
can be activated by a push
button switch, a manual push or
a remote control. This
helps create a barrier free
access to assist the physically
challenged.
The
RXM manual revolving doors
are stylish, sleek and finely
crafted entrances. They ensure
an optimum flow of people
traffic while ensuring maximum
energy conservation. These
doors are available in either
three or four wing configurations
in a variety of finishes.
All visible joints and fasteners
are minimized to maintain
smooth and clean lines.
The
TXA automatic revolving door
is an excellent choice for
high traffic areas while providing
a graceful entrance. It comes
loaded with safety features
including automatic collapsing,
torque limiting and door speed
adjustment. Our sensor systems,
designed for revolving doors,
provide a safe and reliable
entrance. This system provides
for fully adjustable speeds,
remote handicap mounted switches,
bumper guards and safety edge
strips.
The
TXS is the ultimate in security
revolving door systems. The
system utilizes state of the
art technology to ensure the
highest level of security.
The RXS is applicable to all
secure locations including
airports, banks, pharmaceutical,
and government facilities.
This system utilizes anti-hostage
and positive identification
systems (integrated metal
detection systems) to provide
the ultimate in a secure area
integrity.
Our industrial door systems
are diverse in their applications
while being both durable and
reliable. Industrial doors
are applied to pharmaceutical
facilities, manufacturing
plants, petrochemical facilities,
freezer doors, mining, pulp
and paper, military, steel,
and food processing.
Slide
Door Systems
Southeastern Glass Systems offers a broad and comprehensive
range of industrial drives
and door systems. The TXP
1000 is designed to handle
steel doors, freezer doors,
and clean room doors. These
door systems are fully adjustable
and are available with emergency
breakout. The drive system
can handle door panels weighing
up to 1200 pounds.
Swing
Door Operators
The industrial swing door
operator TDAI is designed
to meet the most rigorous
industrial swing door application.
This product can be utilized
in virtually all industrial
facilities. Also available
as an operator on fire door
openings, they are surface
applied and require a fire
alarm contact and/or a heat
or smoke sensor to remove
power from the operating system.
Servax
Drive System
Sets the industry standard
when it comes to drive systems
for large heavy industrial
doors. The Servax drive system
can handle doors weighing
up to 50,000 pounds. These
drive systems are ideally
suited for lead lined doors,
blast resistant doors, airport
hanger doors and large industrial
folding doors.
Curved
Sliding Door System
The Curved Sliding Door System
is ideal door for unique and
architecturally pleasing entrance
systems. This door is available
in single slide or bi-part
slide configurations with
or without breakout. This
door system is perfect for
those entrances that require
grace, elegance, high style,
and is fully adjustable.
Folding
Door System Our Folding
Door System is the ideal selection
for an automatic entrance
system where there is limited
space. The application of
a folding door is perfect
for corridors, hallways, and
small vestibules. This system
is available in two panel
or four panel configurations.
Available as either a fold-out
or a fold-in application to
meet both design and traffic
flow requirements. An excellent
choice for hospitals, retail
stores, and office buildings.
Balanced
Door System Our Balanced Door
System is an easily opened
balanced swing door. It can
be operated either manually
or automatically with the
swing door operator.This door
systems ideal for saving lobby
space and sidewalk space in
confined or heavy traffic
areas. The design provides
for greater ease in opening
than conventional swing doors
and allows for the easier
use of large or heavier swing
doors.
Health
Care Door Systems
Is available as an Intensive
Care Unit and Cardiac Care
Unit door system. This is
a manual door system specifically
designed to meet the needs
of hospital intensive care
and cardiac care units. Available
in two, three, and four panel
construction. With broad glass
panels, patients are always
in full view while providing
for a quiet comfortable environment.
Easy access for hospital staff
is always convenient using
the door system as a manual
swing or sliding door.